Particulierement recommandee sur touter les machines de production pour le sciage des aciers fortement allies et inoxidables. Lame trempee sous vide.
CARACTERISTIQUE : Super HSS Molybdene
Mainly recommended for cutting high alloyed and stainless steels on production hacksaw blades machines. The vacuum heat treatment gives to the blade exceptional teeth hardness and wear resistance.
CHARACTERISTIC : Super HSS Molybdene
| Dimensions /Size | Denture /Teething - D/cm -T/pouce (TPI) | |||||
| mm | inch | 1,2D / 3T | 1,5D/4T | 2,5D / 6T | 4D / 10T | 6D / 14T |
| 300x25x1,25 | 12x1 x.050 | 4004-1 | 4005-1 | |||
| 25x1,60 | 1x.062 | 4009-1 | 4010-1 | 4011-1 | ||
| 32x2 | 1 1/4x.075 | 4015-1 | 4016-1 | |||
| 350x25x1,25 | 14x1x.050 | 4022-1 | 4023-1 | |||
| 25x1,60 | lx.062 | 4027-1 | 4028-1 | 4029-1 | ||
| 32x1,60 | 1 1/4x.062 | 4033-1 | 4034-1 | 4035-1 | ||
| 32x2 | 1 1/4x.075 | 4039-1 | 4040-1 | 4041-1 | ||
| 35x2 | 1 3/8x.075 | 4045-1 | 4046-1 | |||
| 400x25x1,25 | 16x1x.050 | 4052-1 | 4053-1 | |||
| 25x1,60 | 1x.062 | 4057-1 | 4058-1 | 4059-1 | ||
| 32x1,60 | 1 1/4x.062 | 4063-1 | 4064-1 | 4065-1 | ||
| 32x2 | 1 1/4x.075 | 4068-1 | 4069-1 | 4070-1 | ||
| 40x2 | 1 1/2x.075 | 4074-1 | 4075-1 | 4076-1 | 4083-1 | |
| 450x32x1,60 | 18x1 1/4x.062 | 4081-1 | 4082-1 | |||
| 32x2 | 1 1/4x.075 | 4086-1 | 4087-1 | 4088-1 | ||
| 40x2 | 1 1/2x.075 | 4092-1 | 4093-1 | 4094-1 | ||
| 40x2K | 1 1/2x.075K | 4098-1 | 4099-1 | |||
| 500x32x1,60 | 20x1 1/4x.062 | 4105-1 | 4106-1 | |||
| 40x2 | 1 1/2x.075 | 4110-1 | 4111-1 | 4112-1 | ||
| 45x2,5 | 1 3/4x.088 | 4116-1 | 4117-1 | 4118-1 | ||
| 50x2,5 | 2x100 | 4122-1 | 4123-1 | |||
| 500x50x2,5K | 2x100K | 4128-1 | 4129-1 | |||
| 550x45x2,5K | 22x1 3/4.088K | 4140-1 | 4141-1 | |||
| 50x2,5 | 2x100 | 4146-1 | 4147-1 | 4148-1 | ||
| 575x50x2,5K | 23x2x.100K | 4151-1 | 4152-1 | 4153-1 | ||
| 600x50x2,5 | 24x2x.100 | 4157-1 | 4158-1 | 4159-1 | ||
| 50x2,5K | 2x100K | 4164-1 | 4165-1 | |||
Europe
Asia